DUAL ELECTRONICS CORPORATION XD18BT INSTALLATION & OWNER'S MANUAL Pdf Download (2024)

FAQs

What is the password for dual xd18bt? ›

The Bluetooth passcode is "1234”. Note: If passcode "1234" does not pair your device to the receiver, use passcode "0000". Note: The head unit can be in any mode of operation when pairing is performed. The head unit supports A2DP wireless streaming audio from a Bluetooth mobile device directly to your head unit.

With the unit on, press and hold DISP until the clock begins to flash, then release. Press TUNE nnto adjust the hours and TUNE llto adjust the minutes. Press DISP momentarily to save the selected time.

Check each set of wires and speakers to be sure no wire or lead is connected to a chassis ground. The radio will see this as a short and turn off the internal amplifier causing the on but no sound issue. Each speaker connected to the radio needs dedicated positive and negative leads from the radio to each speaker.

The Dual iPlug P1 Smart App Remote is a free app developed by Dual Electronics Corp. for Android users. This app is compatible with several Dual models including XDVD269BT, XDVD179BT, XVM279BT, and more. It connects to compatible Dual receivers via Bluetooth and functions as a wireless remote control.

Dual iPlug S is an app designed to control certain Dual brand radios. It can select from 4 different sources; Radio mode, USB mode, Bluetooth music mode and AUX mode via Bluetooth control. - Radio mode on the APP allows you to scan and store radio stations or select your favorite radio station via the radio presets.

If your Bluetooth devices won't connect, it's likely because the devices are out of range, or aren't in pairing mode. If you're having persistent Bluetooth connection problems, try resetting your devices, or having your phone or tablet "forget" the connection.

If you don't have the manual, set a passkey from your infotainment system's phone settings menu. And if that doesn't work, your local dealer may be able to provide you with the original passkey. Many Bluetooth devices use "1234," "1111," and other simple passkeys by default.

The reset hole is located under the volume knob of the front panel.

Ensure that Bluetooth is activated on your device before beginning the pairing process. The head unit broadcasts the pairing signal constantly when no devices are connected. Complete the pairing sequence from your Bluetooth device. Refer to the owner's manual for your device for more details.

How long does it take for a radio controlled clock to set? ›

If the movement successfully receives the signal, the clock will reset automatically to the correct time. Generally, reception of the WWVB signal takes approximately 3-15 minutes. If the clock still fails to receive the signal while in the WAVE mode, the clock will automatically leave the WAVE mode.

To set up Bluetooth connectivity, first, enable Bluetooth on your device and put it in pairing mode. Then, on the DVD player, go to the Bluetooth settings and search for available devices. Select your device from the list, enter any required passcodes, and confirm the pairing.

Factory Settings Password: Most newer version of Eonon units' password is Most newer version of Eonon units' password is 1688; The other units' password is The other units' password is 126. By entering factory settings, you can set the startup car logo, radio region, RDS function, etc.

Momentarily press to turn the unit on. Press and hold to turn the unit off. Rotate the volume knob to increase or decrease the volume level.